ACtent Instructions
Your Comprehensive Guide to ACTent Installation, Usage, and Troubleshooting Common Issues
Align the center of the tent with the center of the car, and secure the front peg points beneath the tailgate.
Extend and pull open the ridge pole. Make sure the yellow button pops out and faces up.
Insert the pole tips into the plastic chips located at the tent corners, turn and secure them.
Attach the top hook to the tent's roof and extend the upright pole.
Finish attaching 12 side hooks to the pole, distributing them evenly with 3 hooks per each of the four sections. Repeat for the other side.
Stake down the four corner peg points.
Assemble the front pole, slide it into the pole sleeve, and secure the pole tips into the plastic chips.
Attach the front hooks to the front pole, extend the car canopy, and secure the guy ropes.
Install the top roof cover.
Attach the interior connection panel to the trunk floor with Velcro.
Insert the pole tip into the hole at the tarp corner.
Secure it with two peg points.
Align the center of the tent with the center of the car, and secure the front peg points beneath the tailgate.
Extend and pull open the ridge pole. Make sure the yellow button pops out and faces up.
Insert the pole tips into the plastic chips located at the tent corners, turn and secure them.
Attach the top hook to the tent's roof and extend the upright pole.
Finish attaching 12 side hooks to the pole, distributing them evenly with 3 hooks per each of the four sections. Repeat for the other side.
Stake down the four corner peg points.
Assemble the front pole, slide it into the pole sleeve, and secure the pole tips into the plastic chips.
Attach the front hooks to the front pole, extend the car canopy, and secure the guy ropes.
Install the top roof cover.
Attach the interior connection panel to the trunk floor with Velcro.
Insert the pole tip into the hole at the tarp corner.
Secure it with two peg points.
Attach the suction cups to the front windshield.
Secure the elastic seam under the center console and adhere the Velcro to the side wall at the corner.
Loop the elastic band around the top of the seat.
Wrap the webbing loop around the armrest box.
Attach the suction cups to the front windshield.
Secure the elastic seam under the center console and adhere the Velcro to the side wall at the corner.
Loop the elastic band around the top of the seat.
Wrap the webbing loop around the armrest box.
FAQ
Is it compatible with Model S & X?
The product is designed based on the width and height of Tesla Model Y & 3. When fitting other models, it might not look as full. Additionally, the opening mechanism of the Model X rear door might affect usage. Other than that, it works fine with these two models.
Can I use this tent on any type of terrain?
For the best experience, we recommend using the tent on grassy areas. Setting up the tent on sandy, rocky, or concrete surfaces may make it difficult to securely stake the tent to the ground, preventing it from fully expanding into its optimal shape.